Beryllium copper blow mould
Features & Application
Features on extrusion blow molds:

1, Single cavity to 12 cavities.

2, volume from 0.1L to 120L.

3, Blow mold size capacity up to diameter 50 cm

4, made by mold steel S136 or aluminum 7075-T6 and QC-7, Beryllium-copper alloys

are the most common mold materials due to it’s good thermal conductivity with good durability.

5, high production capacity. long life time.

Features & Application

Extrusion Blow mold

Extrusion blow mold is the mold for extrusion blow molding, extrusion blow molding only works on special machinery:

Blow molding machine. as you know, we are professional manufacturer of extrusion blow molding machine.

we also made this extrusion blow mold for our extrusion blow molding machine.

Extrusion Blow Molding

Extrusion Blow Molding is one of several blow molding methods to produce plastic bottles, jars, and jugs. It is a common blow molding technology

used to process many different plastics, including HDPE, PVC, PC, PP, and PETG – and very common with bottles requiring multi-layer technologies

(bottles with special oxygen / moisture barrier requirements to improve product compatibility & stability).

Steps of EBM process

Extrusion Blow Molding is the simplest type of blow molding. A hot tube of plastic material, called a parison, is dropped from an extruder

and captured in a water cooled mold. Once the molds are closed, air is injected through the top or the neck of the container; just as if one

were blowing up a balloon. When the hot plastic material is blown up and touches the walls of the mold the material “freezes” and the container

now maintains its rigid shape.

For colored bottles, colorants are often fed into the extruder at a controlled rate and mixed with the resin as they are being melted.

If barrier and adhesive layers are required, they are fed separately and combined in a co-extrusion head

The Excess

When a bottle is produced using this blow molding method, excess material is created when the mold closes around the parison.

This ‘flash’ must be removed to complete a finished bottle or jar. Flash at the bottom (called the tail), the top (the moil), and for handled

ware – a “handle slug” needs to be trimmed. Typically, the flash is removed upon mold release (trimmed in mold). For bottle with handles

(handleware), offset neck and special circumstances, the flash is extracted via a secondary operation downstream.

The short video below depicts an EBM process for a wide mouth bottle being produced with it’s flash trimmed downstream.

Secondary Operations

In addition to removing the flash, secondary (downstream) operations include flame treatment, leak detection, and post mold decorating.

Flame treatment is sometime used prior to bottle decorating to improve ink adhesion. Leak detection, on the other hand, is always required

to ensure the integrity of the bottle before it leaves the production line. If a bottle fails the leak detection test, it is rejected and sent back for regrind.

Advantages of EBM

There are several advantages of EBM, one of which is lower mold costs compared to ISBM or IBM and the capability of forming handles. Another advantage

of EBM is multi layer capability. In some instances, EBM bottles can have up to 7 layers of materials that include virgin plastic resin layers that encase a

regrind (PCR) layer, barrier layer, and adhesive layers to bond the other layers together.

Example of Application

Mold for cosmetic bottles, bottles of fermented yoghurts and mi

xed milk drinks, container bottles for edible oils.

Applications on our blow molding machine

Applications on our blow molding machine


applications on extrusion blow molding machine

applications on extrusion blow molding machine

Application: Beryllium blow mould