water tank on Water_Flosser
  1. Home
  2. /
  3. Special Blow Molding machine
  4. /
  5. Blow molding machine for plastic water tank on teeth water cleaner flosser

Blow molding machine for plastic water tank on teeth water cleaner flosser

Water-Flosser with water tankWater flossers are reasonably simple to use. The first step is filling the water reservoir with warm tap water or connect the flosser to the tap. Some flossers come with a hose that has the ability to be attached to a bathroom or kitchen faucet, which can make them easier to transport if you are going on vacation.
Next, start with the lowest pressure setting and lean over the sink to minimize splashing water on your bathroom countertops. When water flossing, it is recommended to start with the back teeth and work your way toward the front teeth. Remember to use it between each tooth and along the front and back of each tooth, as well as along the gum line. Some individuals prefer to focus on specific parts of the teeth rather than trying to do all sides of the same tooth at once. For example, you may want to focus on the front and sides of the teeth, then the back and along the front and back gum lines.
Since water is being sprayed into your mouth, you will also need to spit out the excess water periodically. As you get better at using a water flosser, you’ll notice that you get less water on your countertops and bathroom floor.

The water reservoir tank on teeth flosser is made by blow molding only. it is plastic PC or PP, or PETG. they are all food gradeplastic. Food grade plastic is plastic material deemed safe for use with foods. Plastic must meet strict requirements in order to be considered food safe, and is regulated by higher standards than plastic used for other purposes. These are characters on food grade plastic:

  • Be protective: to act as a defense against moisture or contamination without breaking down
  • Be durable: to protect food items during manufacturing, packaging, storage, transportation
  • Be chemically safe: to not contaminate food it comes in contact with. This means the plastic must have no tendency for “leeching”, or the potential for chemicals to seep into the food, where they could either affect the taste or cause adverse health effects for the consumer.

 

Features & Application

water-cleaner-flosser

The Teeth water cleaner flosseris a great solution when you want the convenience of cordless water flossing. Rechargeable and portable, it’s perfect for use in smaller bathrooms or for travel.

  • Removes Up To 99.9% Of Plaque From Treated Areas
  • Up To 50% More Effective For Healthy Gums
  • The Easy and More Effective Way to Floss
  • Cleans Deep Between Teeth And Below The Gum Line

Teeth water cleaner flosser advanced dual water pressure control system allows you to personalize your water pressure intensity. Featuring an ergonomic design, the Cordless Professional includes rechargeable batteries and an easy-to-fill reservoir. Water Flossers are clinically proven to be more effective than traditional dental floss for reducing plaque, gingivitis, and gum disease. And it’s perfect for anyone with braces or implants, and those with crowns, bridges, and veneers

Teeth water cleaner flossercomes with a variety of tips, each with a different intended use:

  • High Pressure Classic Jet Tip – for general use
  • Orthodontic Tip – for cleaning around braces and orthodontics
  • Plaque Seeker Tip – for implants, crowns and other dental work
  • Tongue Cleaner tip- to remove bacteria and help prevent bad breath

As you know, teeth water flosser works with water, so there is a water reservoir tank on it. this water reservoir tank is made by blow molding.

Parameters

The machine parameter list as below:

Screw Diameter mm 70
Screw L/D Ratio L/D 26:1
Extrusion motor KW 30
Oil pressure motor KW 15
Screw rotate speed R.P.M 10-75
Screw heating zone Parts 6
Heating power KW 20
Parison motor  option KW
Extruding Capacity HDPE kg/h Approx.85-90
Mold Center Distance mm
platen distance mm 180-550
mold movement stroke mm 490
Length range of mould mm 150-380
Width range of mould mm 150-450
Thickness range of mould mm 180-250
Dry Circle time s 3.7
Mold-locked pressure Ton 9
Oil tank Volume L 200
Air Pressure kg/cm2 6-8
Air Volume m3/min 0.8
Cooling water pressure mpa 0.3-0.5
Cooling water consumption L/min 60
Min./Max. diameter of product mm 40-300
Weight of product g 30-300
Volume of product L 0.1-6
Total power consumption kw 65
Average power consumption kw Approx.25-38
Net weight of machine ton 9
Gross weight of Machine ton 9.2
Machine dimension (L*W*H) m3 4.1*2.3*2.9

Recommended

Menu